Expert Answers about Kia Vehicle Trim
- Does RoadMaster Base Plate Kit Part 524407-1 Include a TowBar and Will It Require Bumper Trimming
- RoadMaster Base Plate kit, part # 524407-1, only includes the base plates and corresponding installation hardware. It does not include a tow bar or any wiring. You would need to purchase a tow bar separately like part # RM-020.
Installing part # 524407-1 will require trimming the lower grille on a stock bumper. It would be safe to assume that it would also require trimming on any aftermarket, factory option or dealer installed body package, but I do not know how much trimming or where...
view full answer... - Does Draw-Tite Trailer Hitch 76227 Come with Hardware to Install on a 2017 Subaru Outback
- Trailer hitch # 76227 does not come with hardware because it uses nuts already on the 2017 Subaru Outback Wagon. The bumper beam on this vehicle fits over 8 studs in the vehicle frame and is held there with 8 matching nuts. This hitch will be sandwiched between the bumper beam and the end plate where it mounts using the same studs and nuts. I have linked the instructions for you to illustrate this.
The review you mentioned is actually referring to EcoHitch # 306-X7601 which comes with...
view full answer... - Does Curt Trailer Hitch Receiver C11473 Include Vehicle Wiring Harness?
- The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11473 you were looking at for your 2017 Toyota Prius Two does not include a vehicle wiring harness.
You will need to purchase one separately using # 118701 as long as your Prius is not the Prime model.
To finish your towing setup you will also need drawbar # C45521, 1-7/8" hitch ball # A-80 or 2" hitch ball # A-82, and hitch pin and clip # F-4.
I included videos of the products mentioned for you to take a look at.
view full answer... - Is Trailer Wiring Harness Included with a Trailer Hitch
- We do carry trailer wiring harnesses but the Curt hitch, part # C11041, does not include any wiring. Hitches generally come without any wiring because not everyone is going to use the hitch to tow.
The hitch fits specific trims of the Ford Mustang V6 Models between 1994 and 2004. There are specific wiring harnesses that fit the specific style of vehicle so if you can give me the details of your Mustang I can recommend the correct wiring harness to fit.
view full answer... - Is there a Wiring Mounting Bracket on the Curt # C13126 Trailer Hitch for a 2013 Nissan Pathfinder
- Due to the profile of the Curt Class III trailer hitch # C13126, most of the hitch crossbar is recessed under the rear fascia of a 2013 Nissan Pathfinder. Therefore this hitch does not include a mounting location for trailer wiring.
Since there is limited space on the hitch crossbar, a mounting bracket is not included on the hitch. Additionally, the rear fascia has to be trimmed to complete the installation of this hitch. I have included a photos showing this hitch installed on a 2013...
view full answer... - Recommended Towing Package For A 2022 Toyota Highlander
- When it comes to installing a trailer hitch on your 2022 Toyota Highlander The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch # e75ZR is confirmed for your vehicle.
This hitch has a simple bolt-on installation with no welding required, the hitch has a matte black powder coat finish over a protective base coat which offers superior rust resistance.
When it comes to the trailer wiring The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector...
view full answer... - What is the Demco Hijacker Premier Series Double Pivot 5th Wheel Trailer Hitch Part 8550020
- The Demco Hijacker Premier Series Double Pivot 5th Wheel Trailer Hitch part 8550020 is the same as the Demco Hijacker Premier Series Double Pivot 5th Wheel Trailer Hitch part # DM6076P-21K but it also comes with the Universal Above-Bed Base Rails for Demco Premier Series 5th Wheel Trailer Hitches part # DM6071.
If you purchase the part 8550020 or the part # DM6076P-21K with the part # DM6071 then you will still need frame brackets. In order to recommend the correct set I would need to...
view full answer... - Is Ball Mount Included with Trailer Hitch Receiver # C11127?
- The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11127 is a confirmed fit for 2012-2015 Mazda 5 models. It does come with pin and clip, but the ball mount is sold separately. For a ball mount, I recommend the Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs # C45520. You will also want a hitch ball like # C40001 for a 1-7/8 inch or # C40018 for a 2 inch.
For your vehicle trailer connection, I recommend the T-One Vehicle Wiring Harness with 4-Pole...
view full answer... - Do All Trailer Hitches for a 2020 Honda CR-V Come with the Hardware Needed to Install it
- Yes, all of our trailer hitches come with all of the hardware needed to install them. For your 2020 Honda CR-V I highly recommend going with the etrailer Trailer Hitch # e98848 because it's the only option that has a matte black finish. This not only matches the trim style of your vehicle but it actually does a better job of protecting the trailer hitch than the glossy black finish does on the other hitches available. I have attached an installation video for you to check out.
If your...
view full answer...
Go To Results